The housing of the RNSS 4-16 mm² terminal block is made of top-quality imported plastics, which have insulating properties as well as resistance to heating above the characteristics of previously used materials (110°C without deformation).
The connectors are made of Ms profile with dimensions of 8×11 mm and are galvanically protected.
The screws on the terminal contacts are in line with JUS-MB-1.111.Zn. M 5×9. Four screws on each connector are used to clamp the conductor (two on each side) – two are made for clamping the short-circuit bridge.
The short-circuit bridge is made of copper sheet (6×1.5 mm) and is galvanically protected.
On the lower part of the terminal, a mechanism is installed to fasten the terminal to a standard DIN 35 mm line.
For distribution cabinets of high-rise residential buildings as a regular terminal in outlet of the cabinet after the meter.
As a terminal for planning large switchboards for industrial plants, given that it is a terminal block with great load transfer capabilities.
For wiring individual cabinets (with a maximum of 3 meters + MTK receiver or switching clock), with the possibility of using short-circuit bridges.
As a terminal for potential equalization (grounding) during the execution of all types of electrical installations.
The quality and functional solution of the clamp RNSS 4-16 mm² enables its wide application in practice.