TERMINAL BLOCK WITH MULTIPLE OUTPUTS

For difficult working conditions

PRODUCT CODES

22300 – RS 50/10-5×6
22301 – RS 50/10-10×6
22302 – RS 70/10-15×6
22305 – RS 50/10-4×10
22306 – RS 70/10-8×10
22307 – RS 70/10-12×10
22310 – RS 50/10-3×16
22311 – RS 50/10-4×16
22312 – RS 70/10-6×16
22313 – RS 70/10-8×16
22314 – RS 95/10-9×16
22315 – RS 95/10-12×16

RS 50 terminal block housing; RS 70; RS 95 with multiple outlets, made of imported plastics, high insulating power, high resistance to elevated temperatures (manufacturer “GE-Plastic, Holland”), type Noryl SE0 self-extinguishing class Vo.
The transfer plate is made of copper rail with a thickness of 2 mm; 2.5 mm; 3 mm; 30 mm wide, depending on the entrance section of the conductor. The output busbar is made of MS-profile, which is attached to the copper plate with two screws, and the connection is made by soldering with special solder for electrical conductivity.
On the underside of the case there is a molded mechanism for hanging on the DIN 35 line.
RS 50/10 series terminal covers; RS 70/10; RS 95/10 are made of transparent “LEXAN” with self-extinguishing characteristics and high mechanical resistance.
This type of terminal, as a new solution, enables powering a larger number of consumers without short-circuit bridges, which are always a weak point in current terminals (for larger loads).

Primarily, the purpose of RS 50/10, RS 70/10, RS 95/10 terminal blocks with multiple outputs is to power meters at measuring points (from 3-15 meters), replacement for line distribution.
Also, the application of these terminals has no limitations in any cases where it is necessary to feed several consumers from one place and is an ideal hub.