The connection with the conductor (for type A) is realized using a stirrup made of a brass line 5×8 mm, and the transmission via a copper plate 5×1.5 mm. Clamping of the stirrup with the help of screw M 3.5×6.5 mm. JUS.111 – galvanized.
The connection and energy transmission (for TYPE B) is realized via a brass line 5×8 mm, length 26 mm and fastening with screws M3, 5×6 mm, JUS.111 – galvanized. Contact is made by directly clamping the wire under the screw.
The housing in both cases is made of the highest quality plastic mass for this purpose “NORYLL-SEO” from the manufacturer “GENERAL-ELECTRIC PLASTIC” Holland, in the self-extinguishing category Vo.
The mobile short-circuit bridges are made of copper sheet 6×1 mm with the accessories shown in the graphic representation.
The suspension system on the DIN 35 rail is a novelty and ensures a solid connection that is impossible to separate without deliberately unlocking the lock.
The compatibility of the terminal allows various and unlimited combinations, great strength, stability and perfect clamping of the conductor.
USAGE
The purpose is virtually unlimited, i.e. in all places where wiring is done with conductors of 0.8-4 mm².
