TERMINAL BLOCK RS 25-35/1 and RS 25-35/1 ECO

500 V, 110℃ for difficult working conditions

šifra	oznaka mm²/vijakM	d1	d2	d3	L1	L2
25751	P-Al-Cu 16/8	8.5	5.5	11.0	53.0	16.5
25752	P-Al-Cu 16/10	10.5	5.5	11.0	53.0	16.5
25753	P-Al-Cu 25/8	8.5	6.8	12.0	53.0	16.5
25754	P-Al-Cu 25/10	10.5	6.8	12.0	53.0	16.5
25755	P-Al-Cu 25/12	13.0	6.8	12.0	53.0	16.5
25756	P-Al-Cu 35/8	8.5	8.0	14.0	57.5	18.5
25757	P-Al-Cu 35/10	10.5	8.0	14.0	57.5	18.5
25758	P-Al-Cu 35/12	13.0	8.0	14.0	57.5	18.5
25759	P-Al-Cu 50/8	8.5	10.0	15.6	66.5	20.5
25760	P-Al-Cu 50/10	10.5	10.0	15.6	66.5	20.5
25761	P-Al-Cu 50/12	10.5

The connection with the conductor is made with the help of a brass line 11×14 mm with two screws on each side M 8×12 mm. In line with JUS111, galvanized.
The housing is made of the highest quality plastic mass for this purpose “NORYLL-SEO” from the manufacturer “GENERAL-ELECTRIC PLASTIC” The Netherlands, in the self-extinguishing category Vo.
The mobile short-circuit bridges are made of copper sheets 15×2 mm with accessories shown on the graphic display.
The DIN 35 line suspension system is a novelty and ensures a solid connection that is impossible to separate without deliberately unlocking the lock.
The compatibility of the terminal allows various unlimited combinations with high strength and compactness, as well as high reliability of conductor clamping.

Especially for installation at measuring points – construction cabinets with heavy loads.
For installation in places with more difficult working conditions such as increased ambient temperatures and constant maximum loads.
The application of the terminal virtually has no restrictions on the cross-sections of the conductors up to 35 mm².