TERMINAL BLOCK RS 6-10/1 

500 V, 110℃ for difficult working conditions

  • 22103 – terminal block bracket
  • 22102 – RS 6-10/1
šifra oznaka mm²/vijakM d1 d2 d3 L1 L2
25751
P-Al-Cu 16/8
8.5
5.5
11.0
53.0
16.5
25752
P-Al-Cu 16/10
10.5
5.5
11.0
53.0
16.5
25753
P-Al-Cu 25/8
8.5
6.8
12.0
53.0
16.5
25754
P-Al-Cu 25/10
10.5
6.8
12.0
53.0
16.5
25755
P-Al-Cu 25/12
13.0
6.8
12.0
53.0
16.5
25756
P-Al-Cu 35/8
8.5
8.0
14.0
57.5
18.5
25757
P-Al-Cu 35/10
10.5
8.0
14.0
57.5
18.5
25758
P-Al-Cu 35/12
13.0
8.0
14.0
57.5
18.5
25759
P-Al-Cu 50/8
8.5
10.0
15.6
66.5
20.5
25760
P-Al-Cu 50/10
10.5
10.0
15.6
66.5
20.5
25761
P-Al-Cu 50/12
10.5

Technical features

  • The connection with the conductor is made with the help of a brass line 6.5×9.5 mm and with two screws on each side M 4×8 mm. According to JUS-111. Galvanized.
  • The housing is made of the highest quality plastic mass for this purpose “NORYLL-SEO” from the manufacturer “GENERAL-ELECTRIC PLASTIC” Holland, in the self-extinguishing category Vo.
  • The mobile short-circuit bridges are made of copper sheet 8×1.25 mm, with accessories as shown in the graphic representation.
  • The DIN 35 line suspension system is a novelty and ensures a solid connection that is impossible to separate without deliberately unlocking the lock.
  • The compatibility of the terminal allows various and unlimited combinations with high strength, compactness and high reliability of conductor clamping.

USAGE

  • It is especially suitable for use in difficult working conditions, such as increased ambient temperatures and constant maximum loads.
  • It can be applied without any restrictions and can be used for conductor sections up to 10 mm².

ATTESTATION

22102 – ATTESTATION